How much area does one bag of concrete cover?
An 80-lb bag covers about 1.8 square feet at 4 inches thick (0.60 ft³ ÷ 0.333 ft). A 60-lb bag covers 1.35 ft² and a 40-lb bag 0.9 ft² at the same thickness — so a 10×10 ft patio at 4 inches needs about 56 eighty-pound bags.
Coverage per bag at common thicknesses
| Bag size | At 4 in thick | At 6 in thick |
|---|---|---|
| 40 lb (0.30 ft³) | 0.9 ft² | 0.6 ft² |
| 60 lb (0.45 ft³) | 1.35 ft² | 0.9 ft² |
| 80 lb (0.60 ft³) | 1.8 ft² | 1.2 ft² |
| 90 lb (0.675 ft³) | 2.0 ft² | 1.35 ft² |
How to read this table
- 90 lb (0.675 ft³) sits at the top of the table (2.0 ft²) — 1.35 ft². If your situation looks like this row, plan against the upper half of the range rather than the midpoint.
- 40 lb (0.30 ft³) anchors the bottom (0.9 ft²) — 0.6 ft². Treat this as the conservative case you should still be profitable at.
- The gap between the top and bottom row is roughly 2.2×. That spread is why a single blended average is close to useless here — pick the row that matches your setup instead of averaging the column.
- With 4 reference points in the "coverage per bag at common thicknesses" table, the fastest way to use this page is to find the closest row, take its at 4 in thick, then stress-test it ±30% before you build a plan on it.
Context
Coverage math is where bag projects go wrong: people buy for the area and forget thickness. A 100 ft² walkway at 4 inches is 56 bags of 80-lb mix — at that point, check the ready-mix price, because 1.23 yards delivered often costs less than the bags and saves a day of mixing. Divide the coverage numbers by two if you're pouring a 2-inch overlay, and never go below 2 inches for a bonded overlay or 3.5–4 inches for a standalone slab.
What moves this number
Regional pricing
Ready-mix, bag, and labor prices vary 30–50% between US metros. Sun Belt markets with many plants run well below Northeast and remote-area pricing.
Waste and site conditions
Uneven subgrade, spillage, and form bowing consume 5–15% extra material. Orders placed at exact volume routinely come up short mid-pour.
Local code requirements
Frost depth, footing dimensions, and reinforcement rules are set by county. The same project can require twice the concrete in a northern climate versus a southern one.
Methodology
Coverage = bag yield (ft³) ÷ thickness (ft). Yields are manufacturer-published for standard mixes; actual yield varies ±5% with water content and consolidation.
Assumptions and caveats
- Volumes are theoretical; order quantities include a waste allowance but site conditions vary.
- Prices reflect 2026 US national ranges — get local quotes before budgeting a real pour.
- Structural dimensions and frost depths are governed by local building code; verify with your building department.
- This page was last reviewed on 2026-10-01. Ranges are updated as new data lands, so re-check before using them in a contract or a plan.
- Use these numbers as a starting range, not a guarantee — your own historical data always beats a benchmark.
Frequently asked questions
How much area does one bag of concrete cover?
An 80-lb bag covers about 1.8 square feet at 4 inches thick (0.60 ft³ ÷ 0.333 ft). A 60-lb bag covers 1.35 ft² and a 40-lb bag 0.9 ft² at the same thickness — so a 10×10 ft patio at 4 inches needs about 56 eighty-pound bags.
Which option pays the most in the coverage per bag at common thicknesses table?
90 lb (0.675 ft³), at 2.0 ft² (1.35 ft²). That row represents the strongest case in this dataset, so use it as an upper bound rather than an expectation.
What is a realistic low-end figure?
40 lb (0.30 ft³) at 0.9 ft² (0.6 ft²). Plan your costs so the low end still works, then treat anything above it as upside.
Why do the numbers vary so much?
The spread between the highest and lowest row is about 2.2×. Regional pricing and waste and site conditions explain most of that gap — see the drivers section above for the full list.
Where do these numbers come from?
Coverage = bag yield (ft³) ÷ thickness (ft). Yields are manufacturer-published for standard mixes; actual yield varies ±5% with water content and consolidation.
How can I estimate my own number instead of using a benchmark?
Use the Concrete Cost Calculator on RevenueLab — it takes your own inputs and returns a figure specific to your setup, which is always more accurate than a published range.
Model your own numbers
Related reading
More answers in this category
- How do you calculate cubic yards of concrete?
- How many bags of concrete make a cubic yard?
- How do you calculate concrete for a slab?
- How do you calculate concrete for a driveway?
Looking for a calculator?
Search every free tool on RevenueLab — or describe your problem and Rex will pick one.
Last updated 2026-10-01.