Rex says
Money math without the spreadsheet headache. Plug in your numbers and I'll show you exactly where the dollars land.
Try a scenario
Click to load — tweak from there.Inputs
Result
Total cleaning cost
$252
Rate-based cost (pre-minimum)
$252
Effective cost per linear ft
$1.40
Psst — share this and help Rex grow
One click, a permanent link with your numbers baked in.
How to use this
- 1Enter total gutter length (linear ft).
- 2Enter base cleaning rate ($/ft).
- 3Enter building height.
- 4Enter debris level.
- 5Enter company minimum fee ($).
- 6Read your total cleaning cost on the right — it updates as you type.
- 7Hit Share to keep the scenario or send it to someone.
About this calculator
Gutter cleaning cost is typically quoted per linear foot of gutter, with story height and debris severity as the main multipliers — a two-story home with heavy pine needle buildup costs meaningfully more to service than a single-story home with light leaf debris. 2026 US national averages run roughly $1-$2.50 per linear foot for single-story homes and $1.75-$4 per linear foot for two-story or steep-roof homes where ladder safety and access take more time, with most companies also charging a trip/minimum fee for small jobs. This calculator applies a story-height multiplier and a debris-severity multiplier to a base per-foot rate, then adds any minimum service fee, so you can sanity-check a quote against typical national ranges. Getting gutters cleaned twice a year — typically spring and fall — is standard for most climates with deciduous trees nearby; homes without overhanging trees can often go annually.
Worked example
Using the values the calculator loads with:
Inputs
- Total gutter length: 180 linear ft
- Base cleaning rate: 1.4 $/ft
- Building height: 1 story
- Debris level: Light (leaves only)
- Company minimum fee: 125 $
Results
- Total cleaning cost: $252
- Rate-based cost (pre-minimum): $252
- Effective cost per linear ft: $1.40
What each field means
Inputs
- Total gutter length (linear ft)
- The total gutter length used in the calculation, measured in linear ft. Starts at 180 linear ft so you have a working example on load. Accepted range: 20–600 linear ft.
- Base cleaning rate ($/ft)
- The base cleaning rate used in the calculation, measured in $/ft. Starts at 1.4 $/ft so you have a working example on load. Accepted range: 0.5–4 $/ft.
- Building height
- Pick the option that matches your situation — the maths changes per option. Choices: 1 story, 2 stories, 3+ stories.
- Debris level
- Pick the option that matches your situation — the maths changes per option. Choices: Light (leaves only), Moderate (leaves + twigs), Heavy (pine needles/packed).
- Company minimum fee ($)
- The company minimum fee used in the calculation, measured in $. Starts at 125 $ so you have a working example on load. Accepted range: 0–300 $.
Results
- Total cleaning cost
- Returned as a money amount in US dollars and shown as the headline result. It recalculates instantly whenever you change an input, so you can compare scenarios without reloading.
- Rate-based cost (pre-minimum)
- Returned as a money amount in US dollars. It recalculates instantly whenever you change an input, so you can compare scenarios without reloading.
- Effective cost per linear ft
- Returned as a money amount in US dollars. It recalculates instantly whenever you change an input, so you can compare scenarios without reloading.
FAQ
How often should gutters be cleaned?
Twice a year — typically spring and fall — is standard for homes near deciduous trees; homes with heavy pine coverage may need quarterly cleaning, while homes with few overhanging trees can often go once a year.
Why do two-story homes cost more to clean?
Ladder setup, safety equipment, and slower, more careful work at height take significantly more labor time on two- and three-story homes, which is why most companies apply a per-story multiplier rather than a flat per-foot rate.
Does gutter cleaning include downspout clearing?
Most standard quotes include flushing downspouts to confirm free flow, but a fully clogged downspout requiring snaking or disassembly is often billed as an add-on — confirm what's included before booking.
Are gutter guards worth it to reduce cleaning frequency?
Gutter guards reduce but don't eliminate the need for cleaning — most guarded gutters still need a check once a year, but the interval between full cleanings often stretches from twice a year to once, offsetting some of the guard's upfront cost over time.
Accuracy and limitations
- Results are estimates before tax, fees, and inflation unless an input explicitly covers them.
- Rates are treated as fixed for the whole period — variable-rate products will drift from this projection.
- This is educational maths, not financial advice. Check anything contractual with the lender or your accountant.
Related tools
Cite this calculator
Writing about this topic? Grab a citation — every link helps keep these tools free.
RevenueLab. (2026). Gutter Cleaning Cost Calculator. Retrieved from https://www.revenuelab.fyi/toolbox/gutter-cleaning-cost
<p>Source: <a href="https://www.revenuelab.fyi/toolbox/gutter-cleaning-cost" target="_blank" rel="noopener">Gutter Cleaning Cost Calculator — RevenueLab</a> (2026).</p>
Source: [Gutter Cleaning Cost Calculator — RevenueLab](https://www.revenuelab.fyi/toolbox/gutter-cleaning-cost) (2026).