Rex says
Everyday utility math — the kind you'd otherwise pull up four browser tabs for. I keep it to one clean answer.
Try a scenario
Click to load — tweak from there.Inputs
Result
Studs needed
43
Framing lumber cost
$244
Field studs
31
Extra studs for openings
12
Plate lumber (linear ft)
120
Sheathing sheets
10
Psst — share this and help Rex grow
One click, a permanent link with your numbers baked in.
How to use this
- 1Enter wall length (ft).
- 2Enter stud spacing (in).
- 3Enter wall height (ft).
- 4Enter doors + windows.
- 5Enter price per stud ($).
- 6Read your studs needed on the right — it updates as you type.
- 7Hit Share to keep the scenario or send it to someone.
About this calculator
Studs at 16 in on center is the residential default; 24 in on center saves lumber but needs thicker sheathing and drywall to avoid bowing.
Worked example
Using the values the calculator loads with:
Inputs
- Wall length: 40 ft
- Stud spacing: 16 in
- Wall height: 8 ft
- Doors + windows: 3
- Price per stud: 4.2 $
Results
- Studs needed: 43
- Framing lumber cost: $244
- Field studs: 31
- Extra studs for openings: 12
- Plate lumber (linear ft): 120
- Sheathing sheets: 10
What each field means
Inputs
- Wall length (ft)
- The wall length used in the calculation, measured in ft. Starts at 40 ft so you have a working example on load.
- Stud spacing (in)
- The stud spacing used in the calculation, measured in in. Starts at 16 in so you have a working example on load. Accepted range: 12–24 in.
- Wall height (ft)
- The wall height used in the calculation, measured in ft. Starts at 8 ft so you have a working example on load.
- Doors + windows
- The doors + windows used in the calculation. Starts at 3 so you have a working example on load.
- Price per stud ($)
- The price per stud used in the calculation, measured in $. Starts at 4.2 $ so you have a working example on load.
Results
- Studs needed
- Returned as a whole number and shown as the headline result. It recalculates instantly whenever you change an input, so you can compare scenarios without reloading.
- Framing lumber cost
- Returned as a money amount in US dollars. It recalculates instantly whenever you change an input, so you can compare scenarios without reloading.
- Field studs
- Returned as a whole number. It recalculates instantly whenever you change an input, so you can compare scenarios without reloading.
- Extra studs for openings
- Returned as a whole number. It recalculates instantly whenever you change an input, so you can compare scenarios without reloading.
- Plate lumber (linear ft)
- Returned as a decimal number. It recalculates instantly whenever you change an input, so you can compare scenarios without reloading.
- Sheathing sheets
- Returned as a whole number. It recalculates instantly whenever you change an input, so you can compare scenarios without reloading.
FAQ
How does the stud, plate & framing calculator work?
Studs at 16 in on center is the residential default; 24 in on center saves lumber but needs thicker sheathing and drywall to avoid bowing. The underlying maths is: Studs = wall length ÷ spacing + 1 + corners/openings allowance.
What do I need to enter?
5 values: wall length, stud spacing, wall height, doors + windows, and price per stud. Each field starts with a sensible default, so you can change one number at a time and watch the result move.
What does the studs needed result mean?
It is returned as a whole number and updates live as you edit the inputs, so you can compare two or three versions of a scenario in a few seconds.
Is this calculator free, and do I need an account?
Yes, it's free, and no account is required. Nothing you type is stored on our servers — the maths runs entirely in your browser.
How accurate is the result?
It applies the standard formula exactly, so the arithmetic is precise. Estimates assume standard, average conditions — local rules, pricing, and materials vary.
Who is this tool for?
It's built for anyone doing everyday planning maths — a quick estimate that would otherwise need four browser tabs and a calculator app.
Accuracy and limitations
- Estimates assume standard, average conditions — local rules, pricing, and materials vary.
- Results are rounded for readability; add a buffer before ordering, booking, or committing.
- Double-check anything with a real cost attached against a local quote.
Related tools
Cite this calculator
Writing about this topic? Grab a citation — every link helps keep these tools free.
RevenueLab. (2026). Wall Framing Calculator. Retrieved from https://www.revenuelab.fyi/toolbox/framing-studs
<p>Source: <a href="https://www.revenuelab.fyi/toolbox/framing-studs" target="_blank" rel="noopener">Wall Framing Calculator — RevenueLab</a> (2026).</p>
Source: [Wall Framing Calculator — RevenueLab](https://www.revenuelab.fyi/toolbox/framing-studs) (2026).