Roofing · Free calculator

Gutter Installation Cost Calculator

Price new gutters by linear feet and material — aluminum, steel, or copper — including downspouts, removal, and gutter guards.

Short answer

Gutter Installation Cost Calculator

$1,840Estimated installed cost

$11.50 per linear foot all-in — quotes should land $1,564–$2,392. Seamless aluminum is the default for a reason: few leak points, 20–30 year life, and half the cost of steel. Downspouts run $60–$180 each installed depending on stories.

How it's calculated: 160 ft of seamless aluminum + 4 downspouts. Adjust the inputs below to recalculate for your own numbers.

Disclaimer: Estimates only — not a quote. Home-services pricing varies widely by region, season, site access, permits, and contractor. Always get 2–3 written local quotes before committing.

New here? Watch it work in 2 seconds — then tweak it for you.
160

Measure each roof edge that needs gutter; a typical ranch needs 140–200 ft.

1
4
1
0
Try it like this

Tap a scenario to load realistic numbers, then tweak the sliders.

Formula used

Gutter installation cost

Seamless aluminum runs $4–$9 per linear foot installed, steel $9–$15, copper $15–$30. Downspouts are priced separately at $60–$180 each. Guards add $6–$12/ft. Prices assume one-story access; two-story work adds roughly $1–$2/ft.

Total = linear ft × material rate + downspouts × $120 + removal + guards
Seamless aluminum per ft
$4–$9
Copper per ft
$15–$30
Downspout each
$60–$180
Use this elsewhere

Embed or cite it

Backlink-friendly embed

Embed this calculator

Free to embed on any site. Inputs preserved, link back to RevenueLab. Each format trades polish for SEO juice.

<script async src="https://www.revenuelab.fyi/embed.js"
  data-calculator="gutter-installation-cost-calculator"
  data-title="Gutter Installation Cost Calculator"
  data-query="linearFt=160&material=1&downspouts=4&removal=1&guards=0"></script>

Recommended — auto-resizes to fit, no scrollbars, and drops a crawlable link in your page.

Cite this calculator

Writing about this topic? Grab a citation — every link helps keep these tools free.

APA
RevenueLab. (2026). Gutter Installation Cost Calculator. Retrieved from https://www.revenuelab.fyi/gutter-installation-cost-calculator
HTML
<p>Source: <a href="https://www.revenuelab.fyi/gutter-installation-cost-calculator" target="_blank" rel="noopener">Gutter Installation Cost Calculator — RevenueLab</a> (2026).</p>
Markdown
Source: [Gutter Installation Cost Calculator — RevenueLab](https://www.revenuelab.fyi/gutter-installation-cost-calculator) (2026).

Worked example: 160 ft of seamless aluminum, four downspouts

160 ft at $7/ft is $1,120; four downspouts add $480; removing the old sectional gutters adds $240. Total lands near $1,840 — $11.50 per linear foot all-in, which is typical for a one-story with removal. Quotes from $1,550 to $2,400 are competitive. Add gutter guards and the same job prices near $3,100.

  • Fewer, bigger downspouts beat many small ones: one 3×4 downspout handles ~1,200 sq ft of roof.
  • Fascia rot discovered at removal is the common add-on: $6–$10/ft to replace fascia board.
  • 5-inch K-style is standard; 6-inch is worth the small premium in heavy-rain regions.

When to replace instead of repair

Sectional gutters with seam leaks, sagging runs, or rust-through are replace candidates — seam re-sealing is a 1–2 year patch. Seamless replacement eliminates the failure mode entirely. If the gutters are fine but overflowing, the problem is usually downspout count or pitch, not the gutter itself — a $300 re-pitch beats a $2,000 replacement.

FAQ

How much do new gutters cost for a typical house?

$1,200–$2,500 for seamless aluminum on an average one-to-two-story home (150–200 linear ft). Copper runs $3,500–$7,500 for the same footage.

Are gutter guards worth it?

At $6–$12/ft they pay back in 3–5 years if you currently pay for twice-yearly cleaning ($150–$300 per visit) — and they're near-essential for two-story homes where DIY cleaning is unsafe.

How long do gutters last?

Aluminum 20–30 years, galvanized steel 15–25, copper 50+. The fasteners and sealant usually fail before the metal does.

Can I install gutters myself?

Sectional vinyl/aluminum from a home store, yes on a one-story. Seamless gutters are formed on-site from a coil machine — that's pro-only work, and it's most of the market.

How this calculator is built

Independently maintained

Written by Sam Doshi and the RevenueLab editorial team. We don't sell the data feeds this tool is built on.

Sourced from primary data

Benchmarks come from public AdSense / Stripe / IRS disclosures and reader-submitted data — never third-party "$X per view" claims. Full methodology.

Last editorial review

Reviewed on a rolling quarterly cycle. Dated reviews are published on the methodology record for each calculator.

Editorial standards

See our editorial policy and disclaimer. Results are estimates, not advice.

Helpful?