{
  "slug": "10x10-concrete-slab-calculator",
  "title": "10x10 Concrete Slab Calculator",
  "heading": "10x10 Concrete Slab Calculator",
  "category": "other",
  "url": "https://www.revenuelab.fyi/toolbox/10x10-concrete-slab-calculator",
  "summary": "Concrete yardage, bags, and cost for a standard 10x10 slab, pre-filled and editable.",
  "description": "A 10x10 slab is the go-to footprint for a small patio, shed pad, or utility pad, and the math is the same every time: length times width times thickness gives you volume, which you convert to cubic yards for ready-mix or bags for a DIY pour. This calculator starts at 10 feet by 10 feet with a standard 4-inch thickness so you can get a number immediately, but every field is editable if your actual pad is a little different. It adds a waste factor for spillage and uneven subgrade, then gives you both the ready-mix cubic yardage to order and the bag count if you're mixing 80-lb bags by hand, plus the total material cost at your local price per yard.",
  "formula": "Cubic Yards = (Length × Width × Thickness in inches ÷ 12) ÷ 27 × (1 + Waste%). Bags (80lb) ≈ Cubic Yards × 45. Cost = Cubic Yards × Price per Yard.",
  "dateModified": "2026-09-06",
  "run_url": "https://www.revenuelab.fyi/api/public/calc?tool=10x10-concrete-slab-calculator",
  "inputs": [
    {
      "id": "length",
      "label": "Slab length",
      "kind": "number",
      "hint": null,
      "default": 10,
      "unit": "ft",
      "min": 1,
      "max": null
    },
    {
      "id": "width",
      "label": "Slab width",
      "kind": "number",
      "hint": null,
      "default": 10,
      "unit": "ft",
      "min": 1,
      "max": null
    },
    {
      "id": "thickness",
      "label": "Thickness",
      "kind": "number",
      "hint": null,
      "default": 4,
      "unit": "in",
      "min": 2,
      "max": 12
    },
    {
      "id": "waste",
      "label": "Waste factor",
      "kind": "number",
      "hint": null,
      "default": 10,
      "unit": "%",
      "min": 0,
      "max": 30
    },
    {
      "id": "pricePerYard",
      "label": "Ready-mix price per cubic yard",
      "kind": "number",
      "hint": null,
      "default": 150,
      "unit": "$",
      "min": 0,
      "max": null
    }
  ],
  "outputs": [
    {
      "id": "cubicYards",
      "label": "Ready-mix needed",
      "format": "decimal",
      "hint": null,
      "primary": true
    },
    {
      "id": "bags",
      "label": "80-lb bags (DIY mix)",
      "format": "number",
      "hint": null,
      "primary": false
    },
    {
      "id": "cost",
      "label": "Estimated concrete cost",
      "format": "currency",
      "hint": null,
      "primary": false
    },
    {
      "id": "cubicFeet",
      "label": "Total cubic feet",
      "format": "decimal",
      "hint": null,
      "primary": false
    }
  ],
  "worked_example": {
    "inputs": [
      "Slab length: 10 ft",
      "Slab width: 10 ft",
      "Thickness: 4 in",
      "Waste factor: 10 %",
      "Ready-mix price per cubic yard: 150 $"
    ],
    "outputs": [
      "Ready-mix needed: 1.36",
      "80-lb bags (DIY mix): 61",
      "Estimated concrete cost: $204",
      "Total cubic feet: 33.3"
    ]
  },
  "how_to": {
    "title": "How to use this",
    "steps": [
      "Enter slab length (ft).",
      "Enter slab width (ft).",
      "Enter thickness (in).",
      "Enter waste factor (%).",
      "Enter ready-mix price per cubic yard ($).",
      "Read your ready-mix needed on the right — it updates as you type.",
      "Hit Share to keep the scenario or send it to someone."
    ]
  },
  "scenarios": [
    {
      "name": "Conservative",
      "description": "Lower-end numbers — what if things land soft?",
      "values": {
        "length": 6,
        "width": 6,
        "thickness": 2.4,
        "waste": 6,
        "pricePerYard": 90
      }
    },
    {
      "name": "Typical",
      "description": "Defaults — the most common real-world setup.",
      "values": {
        "length": 10,
        "width": 10,
        "thickness": 4,
        "waste": 10,
        "pricePerYard": 150
      }
    },
    {
      "name": "Ambitious",
      "description": "Higher-end numbers — what if things really pop?",
      "values": {
        "length": 16,
        "width": 16,
        "thickness": 6.4,
        "waste": 16,
        "pricePerYard": 240
      }
    }
  ],
  "limitations": [
    "Estimates assume standard, average conditions — local rules, pricing, and materials vary.",
    "Results are rounded for readability; add a buffer before ordering, booking, or committing.",
    "Double-check anything with a real cost attached against a local quote."
  ],
  "faq": [
    {
      "q": "Is 4 inches thick enough for a 10x10 slab?",
      "a": "Yes for patios, sheds, and walkways. Bump to 5-6 inches if a vehicle will ever park on it, since foot-traffic-only slabs and driveway-rated slabs have very different load requirements."
    },
    {
      "q": "Should I order ready-mix or mix bags myself for 10x10?",
      "a": "At 4 inches thick a 10x10 slab is about 1.4 cubic yards, which is right at the edge — many contractors will still deliver ready-mix for a small minimum-load fee, and it cures more consistently than dozens of hand-mixed bags."
    },
    {
      "q": "Why add a waste factor?",
      "a": "Subgrade is never perfectly flat, forms leak a little, and spillage happens during placement. A 10% waste factor covers typical conditions; rocky or sloped sites often warrant 15%."
    }
  ],
  "related": [
    "https://www.revenuelab.fyi/toolbox/12x12-concrete-slab-calculator",
    "https://www.revenuelab.fyi/toolbox/20x20-concrete-slab-calculator"
  ],
  "license": "CC-BY-4.0",
  "citation": "RevenueLab — 10x10 Concrete Slab Calculator (https://www.revenuelab.fyi/toolbox/10x10-concrete-slab-calculator)"
}